0:00
Hello and welcome back to my channel where we go beyond the design to build something
0:08
beautiful. Today I'm showing you how to build a riser, a home theater riser. I built this
0:14
riser for our theater room and the goal of this theater room was to have a lot of space
0:22
for people to sit, of course. I mean, what's the purpose of a theater room other than to
0:27
bring lots of people in and enjoy time with your family watching a movie. So I wanted
0:33
of course, the people in the back to be able to see the screen. So I built this riser to
0:38
be able to use this couch behind me and be able to see the screen. It's super easy to
0:45
do. Simply built the frame and then I covered it with plywood, like wrapped it with plywood
0:53
as you'll see in the video here. And then I added carpet to that. I'm not a carpenter
1:01
by any means as far as like, I don't know what you call it, but a carpet laying person
1:07
I've never laid carpet in my life. That's not, that's way beyond my DIY skills. But
1:14
so all I did for this super simple was I just took my staple gun and I just stapled it on
1:22
to the platform itself. And it's held up well. It's been over a year now since I did
1:28
this and it's held up great. So if you don't have carpet laying skills, whatever you call
1:35
that, installation skills, whatever, then this definitely will work great. And it's
1:43
super easy and gets through the project really, really fast. If you enjoy this video, please
1:48
don't forget to hit that like button and subscribe for more great content. This riser
1:54
is based off of the riser measurements I needed. You can see those measurements in the description
2:00
below. Be sure to adjust the measurements to meet your needs. Cut two 2x4s at 90 inches
2:06
each and four 2x4s at 41 inches each. Drill 1.5 inch pocket holes into each end of the
2:13
41 inch boards. Attach two of the 41 inch boards to the 90 inch boards using 2.5 inch
2:20
pocket hole screws. You should now have a rectangle. Here's a closer look at one of
2:25
the ends of your rectangle. Measuring in about 20 inches from each end, attach your remaining
2:31
two 41 inch boards to the 90 inch boards. Now we're ready to cut and attach our vertical
2:38
risers. Cut 20 2x4s at 5.25 inches each. Attach these 20 vertical risers referring
2:46
to the picture below for the placement of each board. Add the top supports. Cut two
2:51
2x4s at 90 inches each. Attach to the risers with 2.5 inch wood screws. Cut four 2x4s at
2:59
41 inches each. Attach these top supports directly above the other four 41 inch boards
3:06
using 2.5 inch wood screws. For extra support, I added one more support in the middle following
3:12
these same instructions. Cut the plywood platform piece to fit and attach with 1.5 inch wood
3:18
screws. Now you're ready to attach the sides. Cut all four sides to fit and attach. Attach
3:24
the carpet using a nail or staple gun. You'll cut the top and long sides to fit the platform
3:30
This will be all one piece. Attach this piece with your nail gun. Next, cut the shorter
3:35
sides to fit and attach the same way. And that's it! Now you have a home theater riser
3:41
to raise up your sofa in the back and ensure a better viewing experience for everyone
3:48
For a more detailed look at this home theater riser project, be sure to check out the full
3:53
tutorial linked below. And don't forget to like and subscribe for more great content