A simple DIY tutorial to show you how to use a Kreg Jig for your woodworking projects. A Kreg Jig makes drilling pocket holes easy!
Show More Show Less View Video Transcript
0:00
This is my Kreg jig. It's actually very simple and I highly recommend buying one. It is my
0:11
most used tool by far. Probably right up there with my miter saw. So, I will show you what
0:18
I'm going to do. I need, this material thickness is a half inch, so I need to set my tool to
0:28
a half inch, my drill bit. I'm going to set it to a half an inch. So, what I'm going to
0:34
do is I'm going to move this lever here to here and I'm going to make sure that my step
0:42
of my drill bit, this is called the step, is at a half an inch, which it is. So, then
0:50
I'm going to take and lock that. So, I'm making sure that it's at a half an inch. Then I'm
0:57
going to lock it with my Allen wrench. So, this is now locked at a half an inch. It's
1:03
not going to move and my step is at a half an inch, the step of my bit. And again, the
1:09
step just means where that step goes down from here to the actual drill bit part or
1:17
whatever. So, hopefully that's clear. Then, I'm not done yet on this device. I need to
1:23
now move this marking to a half an inch. My wood is in there. It's clamped down and
1:30
ready to go, ready to be drilled into. I'm just going to drill one hole, one pocket hole
1:35
I've got my drill bit set for where it needs to be and we are ready to go. So, I'm going
1:46
to now drill down in here and this piece here is going to stop my drill from going
1:59
too far. Alright, so I drilled pocket holes into both of my boards and I'm going to have
2:15
to drill a little bit more. So, I'm going to put this in here so that I can drill a
2:19
screw here and a screw here into the board that's going to go here
Home Improvement
Construction & Power Tools
People & Society
